6460 CSA Engineer
The Dayton CSA Work Boot is modelled on our original 64 Logger. Made with 7-7 1/2 Oz. logger-tan full-grain leather, it is built tough to give superior wear and comfort in almost any environment. All have a Grade 1 steel safety toe-cap and composite plate to provide CSA "Green triangle" certification. The 10' Lineman and the 4' Romeo are ESR or Ohm rated.
- 7.5 ounce full grain upper leathers for fit and durability
- Goodyear welted construction for superior support, weather resistance, durability and easy resoling
- Leather lining for breathability
- Full length cork fill for cushioning
- Steel shank for long lasting support
- Partial bellows tongue for weather resistance
- Vibram 100 Classic Hiker full sole and heel base (acid and oil resistant)
- Steel toe cap and composite plate
"When buying shoes, choose a reputable brand, and don't just buy one pair: buy TWO pairs. Then wear them on ALTERNATE DAYS. This will at least TRIPLE the normal wear for each pair. Why? Because in spite of the personal conviction of everyone in the fragrance of his own feet, all feet sweat and exude acids which, by cumulative effect, tend to rot the shoes from within. Giving them a 24 hour layover allows sufficient time for these corrosives to disperse. Two good pairs of shoes worn this way will outlast half a dozen pairs when each is worn continuously. Try it."
Standard configurations include:
- Brown Oil Tan
- Black Oil Tan
Protect your boots (additional charges will apply):
- Epoxy toe cap
Note: CSA boots are only available in Dayton sizes 4E-6.5E and 6.5EEE-13EEE
At Dayton Boots SIZE MATTERS. We offer three sizing options; size yourself, remote fitting and in store fitting.
Dayton Boots fit similarly to UK men’s sizing. This typically means one full size down from your standard North American sneaker size. *** IE: NA 8.5 would be a Dayton 7.5.*** Dayton sizing will typically be down 3 full sizes down from a US Women’s sneaker.
If widths options are available, pick a narrow width if you know you have a narrow foot or want a snugger fit. Or, pick a wider width if you know you have a high instep, wider foot or want a little more room.
If you already own a pair of Dayton boots or are confident in your size you can size yourself. Remember your Dayton size is one down from your normal North American sneaker size. If widths are available, pick a narrow width if you know you have a narrow foot or want a snugger fit. Or, pick a wider with if you know you have a high instep, wider foot or want a little more room. Choose: I know my Dayton Size.
If you are unsure of your size but can’t make it to our store we can remotely fit you via our online sizing exercise. All orders will receive a sizing exercise after purchase. Choose: I need help with Sizing. (Note $20 service fee)
For in store sizing, place an order by selecting one size down from your normal North American sneaker size and note that you’d like to come into the factory store and have our experienced staff confirm your Dayton size. Choose: I’ll come into the Original Factory Shop.